Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

Annealing effects on the magnetization of Co–Ni–B amorphous nanoparticles

Chemically prepared (Co_xNi_1−x)_1−yB_y (x=0.5, 0.75, 1; y≈0.4) amorphous fine particles were characterized by X-ray diffraction, DTA and TGA, and in situ magnetic measurement as a function of annealing temperature in an inert atmosphere. Magnetic measurement performed in as-prepared and 150°C annealed samples shows an increase of the saturation magnetization and magnetic moment after thermal treatment. Room temperature magnetization increases by factors of 3.5, 1.8, and 1.5, for x=0.5, 0.75, and 1, respectively. These measurements may indicate a local re-ordering of the amorphous phase at temperatures much lower than the full crystallization temperature.     

Infrared and Raman spectroscopic investigation of Eu3+-doped mono and Di-urethanesil hybrid siliceous materials

The general features of two series of sol-gel derived materials, designatedurethanesils (Ut), have been investigated by infrared and Raman spectroscopies with the goal of elucidating the chemical environment of the Eu³⁺ cations. The host frameworks of the two families of ormolytes studied have been represented by m-Ut(350) and d-Ut(300), where m stands for mono, d stands for di, 350 and 300 are the average molecular weights of the organic precursors (poly(ethylene glycol) methyl ether, PEGME, and poly(ethylene glycol), PEG, respectively). The hybrid matrix of the mono-xerogels is composed by a siliceous backbone bonded by means of urethane linkages (-NHC (=O)O-) to pendant methyl end capped oligopolymer chains with approximately 7 oxyethylene units, whereas that of the di-xerogels is based on a siliceous network grafted through urethane groups to both ends of poly(oxyethylene) segments containing about 6 (OCH₂CH₂) repeat units. Both classes of materials have been doped with europium triflate (Eu(CF₃SO₃)₃). The doped samples have been identified by m-Ut(350)_nEu(CF₃SO₃)₃ and d-Ut(300)_nEu(CF₃SO₃), where n is the molar ratio of (OCH₂CH₂) repeat units per Eu³⁺ ion. Materials with n ranging from ∞ to 5 have been analyzed. The spectral data obtained provide evidence that the cations begin to coordinate to the ether oxygen atoms of the oligopolymer chains at n=40 in the mono-urethanesils and at n=10 in the di-urethanesils. In mono-urethanesils samples with n>40 and in di-urethanesils materials with n>10, the Eu³⁺ coordinate exclusively to the carbonyl oxygen atoms of the urethane linkages. Paper presented at the 8th EuroConference on Ionics, Carvoeiro, Algarve, Portugal, Sept. 16–22, 2001.     

HPLC法测定阿奇霉素葡萄糖注射液中阿奇霉素的含量

利用高效液相色谱法，以VP-ODS型色谱柱，乙腈-异丙醇-水-氨水（60：25：15：0.1)为流动相，于210nm波长处测定了阿奇霉素葡萄糖注射液中阿奇霉素葡萄糖注射液中阿奇霉素的含量。阿奇霉素的浓度在0.75-1.75mg/mL线性关系良好，线性方程的A=881910.4c-16208.2，相关系数r=0.9999。阿奇霉素的平均回收率为99.59%，测定结果的相对标准偏差为1.31%。     

Paraxial designing of planar waveguide variable-index focusing elements: Part 2—lenses of elliptical symmetry

A paraxial ray-optics formalism proposed for designing radially symmetric variable-index lenses is extended to the case of lenses of elliptical symmetry of the index profile.     

Effect of the environment on the stability of surfactant–polypeptide self‐assembled complexes: Molecular dynamics simulations of stoichiometric complexes formed by N‐dodecyltrimethylammonium and poly(α,L‐glutamate) in chloroform,methanol, and water

A series of molecular dynamics simulations have been performed to study the supramolecular structure of self‐assembled complexes formed by N‐dodecyltrimethylammonium cations and the synthetic polypeptide poly(α,L ‐glutamate). The influence of the type of solvent has been investigated, considering explicit environments of chloroform, water, and methanol on a stoichiometric complex containing 15 residues. In chloroform, the complex stabilizes in a regular structure: the polypeptide adopts an α‐helix conformation that is regularly surrounded by surfactant molecules to form electrostatic interactions through a multiple interaction pattern. However, this structure destabilizes in methanol and water: (a) the α‐helix unfolds in the two solvents and (b) the electrostatic links between the surfactant molecules and the polyanion are disrupted in aqueous solution, although these interactions are still preserved in methanol. The role of the solvent environment in stabilizing or destabilizing the polypeptide secondary structure, the organization of the surfactant molecules, and predominantly the surfactant–polypeptide supramolecular organization is discussed in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1122–1133, 2006     

The influence of glass coating on the single domain wall potential in amorphous glass-coated Fe-based microwires

The effect of the glass coating on the single domain wall potential in amorphous glass-coated Fe-based microwire has been studied by the switching field distribution technique. The thermoactivated mechanism model is used to describe the thermally activated switching through the complex energy barrier in amorphous FeSiB microwires. Glass removal leads to the increase of the probability of the thermally activated switching pointing to the decrease of the energy barrier.     

Multiscale Finite Element Modeling of Arc Dynamics in a DC Plasma Torch

The dynamics of the electric arc inside a direct current non-transferred arc plasma torch are simulated using a three-dimensional, transient, equilibrium model. The fluid and electromagnetic equations are solved numerically in a fully coupled approach by a multiscale finite element method. Simulations of a torch operating with argon and argon–hydrogen under different operating conditions are presented. The model is able to predict the operation of the torch in steady and takeover modes without any further assumption on the reattachment process except for the use of an artificially high electrical conductivity near the electrodes, needed because of the equilibrium assumption. The results obtained indicate that the reattachment process in these operating modes may be driven by the movement of the arc rather than by a breakdown-like process. It is also found that, for a torch operating in these modes and using straight gas injection, the arc will tend to re-attach to the opposite side of its original attachment. This phenomenon seems to be produced by a net angular momentum on the arc due to the imbalance between magnetic and fluid drag forces.     

模糊神经网络在复合地基沉降量预测中的应用

复合地基后期沉降变形对于建筑物设计及安全具有重要意义,针对通过长期沉降观测以得到复合地基的最终沉降需要耗费较多资源的问题,提出了一种基于模糊神经网络的预测方法.该方法考虑沉降变化过程有较大的随机性和模糊性,直接将样本数据进行模糊化,所得的模糊数代表了样本点集与控制点集中各分量之间的相关度,并依此建立模糊BP神经网络进行学习和估算.实验结果表明了该方法对沉降进行预测是可行与有效的,且在相对误差的有效控制方面优于BP网络方法与灰色方法.     

A local strict comparison theorem and converse comparison theorems for reflected backward stochastic differential equations

A local strict comparison theorem and some converse comparison theorems are proved for reflected backward stochastic differential equations under suitable conditions.